Gas Specific Heat Ratio Modules

Calculate compressible flow gas properties.

Calculate gas specific heat constant pressure, specific heat constant volume, specific heat ratio, molar mass, gas constant, gas specific gravity, gas compressibility factor and density from gas temperature and pressure. The gas compressibility factor is calculated from the critical point temperature, critical point temperature, and the accentric factor using either the Peng Robinson, Soave, Redlich Kwong or Van Der Waals equation of state (EOS).

Reference : Fluid Mechanics, Frank M White, McGraw Hill

Change Module :

• Compressible Flow Area And Internal Diameter Calculation Module
• Compressible Flow Blowdown Time Calculation Module
• Compressible Flow Calculation Module
• Compressible Flow Critical Flow Calculation Module
• Compressible Flow Fanno Line Calculation Module
• Compressible Flow Minor Loss Factor Calculation Module
• Compressible Flow Normal Shock Wave Calculation Module
• Compressible Flow Nozzle Flow Rate Calculation Module
• Compressible Flow Pitot Tube Calculation Module
• Compressible Flow Pressure Loss Factor Calculation Module
• Compressible Flow Pressure Relief Valve Calculation Module
• Compressible Flow Pressure Relief Vent Calculation Module
• Compressible Flow Speed Of Sound Calculation Module
• All

Related Modules :

• API 520 Pressure Relief Device Calculation Module
• Fluid Density And Volume Calculation Module
• Gas Compressibility Factor Calculation Module
• IAPWS R7-97 Steam Table Calculation Module
• Line Pipe Cross Section Calculation Module
• More Gas Property Modules