Redlich Kwong Formula Modules

Calculate gas compressibility factor or Z factor.

The compressibility factor is used to account for the non ideal behaviour of real gases. The non ideal gas law is expressed as

` P V = Z Ro T `

where :

P = gas pressure `
`T = gas temperature `
`V = gas mole volume `
`Z = gas compressibility factor `
`Ro = universal gas constant

The compressibility factor canbe calculated using either the Peng Robinson, Soave, Redlich Kwong or Van Der Waals cubic equations of state (EOS), or using the virial equation.

Change Module :

• Gas Compressibility Factor From The Cubic Equation Calculation Module
• Gas Compressibility Factor From The Virial Equation Calculation Module
• All

Related Modules :

• Fluid Compressibility Factor Data Module
• Fluid Critical Point And Molar Mass Data Module
• Fluid Mixture From Kay's Rule Calculation Module
• More Fluid Compressibility Z Factor Modules

Calculate pseudo-critical properties (temperature, pressure, accentric factor, molar mass) of a fluid mixture using the simple form of Kay's rule with no interaction parameters.

The mole fraction of component one is automatically adjusted so that the sum of the mole fractions equals one. The mixture properties are approximate.

Related Modules :

• Fluid Critical Point And Molar Mass Data Module
• Fluid Density And Volume Calculation Module
• Fluid Vapour Pressure Calculation Module
• Gas Compressibility Factor Calculation Module
• Liquid Kinematic And Dynamic Viscosity Calculation Module
• Two Phase Gas Liquid Heat Capacity Calculation Module
• More Fluid Mixture Modules