Fluid Saybolt Viscosity Modules

Calculate Saybolt universal seconds (SUS), and Saybolt Furol seconds (SFS) for a single phase liquid.

Saybolt viscometers are used to measure liquid viscosity by the time taken for a specified quantity of the liquid to flow downwards through a vertical tube. Viscosity can be entered as either

• Dynamic viscosity
• Kinematic viscosity
• Saybolt Universal Seconds (SUS) measured at 100 F
• Saybolt Universal Seconds at time T (SUST) measured at temperature T
• Saybolt Furol Seconds (SFS122) measured at 122 F
• Saybolt Furol Seconds (SFS210) measured at 210 F

Saybolt Universal seconds are measured with the universal tip. Saybolt Furol seconds are measured with the Furol tip. Saybolt Furol seconds are used for viscous liquids. The Saybolt viscometer is not suitable for fluids with a viscosity less than 1.8 centi Stokes (cSt), or 1.8e-6 meters square per second (m^2/s).

Change Module :

• Gas Kinematic And Dynamic Viscosity Calculation Module
• Liquid Kinematic And Dynamic Viscosity Calculation Module
• Three Phase Gas Oil Water (Black Oil) Viscosity Calculation Module
• Two Phase Gas Liquid Viscosity Calculation Module
• Water And Steam Viscosity Calculation Module
• All

Related Modules :

• Fluid Dynamic And Kinematic Viscosity Data Module
• Line Pipe Cross Section Calculation Module
• More Fluid Viscosity Modules