Pipeng Toolbox : Water Cut Modules Login
Short Cuts
GO
Main ±
Beams ±
References ±
Fluid Flow ±
Fluid Properties ±
Maths ±
Materials ±
Pipelines ±
Soils ±
Subsea ±
Data ±
Units ±
Help ±
Demo

Water Cut Ratio Modules

Links : ±
CALCULATOR MODULE : DNVGL RP O501 Water Cut Ratio   ±
CALCULATOR MODULE : Two Phase Liquid Water Cut Ratio   ±
CALCULATOR MODULE : Three Phase Gas Oil Water (Black Oil) Density   ±

Calculate fluid density for three phase black oil (oil, water and gas).

The gas oil ratio is the ratio of gas moles to oil volume. The gas mass fraction is the ratio of gas mass to total fluid mass. The gas volume fraction is the ratio of gas volume to total fluid volume. Water cut is the ratio of water volume over total liquid volume (equals the water volume fraction in the liquid). Gas volume is dependent on fluid temperature and pressure. Gas oil ratio is often measured as gas standard volume (scf or scm) per oil volume (barrels, gallons, cubic feet or cubic meters).

Change Module :

Related Modules :

CALCULATOR MODULE : Three Phase Gas Oil Water (Black Oil) Heat Capacity   ±

Calculate three phase gas oil water (black oil) heat capacity.

Black oil is a three phase mixture of oil, water and gas. Water cut is measured relative to the total liquid volume (gas volume is ignored). Gas oil ratio (GOR) is measured relative to the oil volume at standard conditions (water volume is ignored). Gas oil ratio (GOR) is the ratio of gas moles over liquid volume. Gas moles are commonly measured by standard cubic feet (scf), and stand cubic meters (scm). Gas oil ratio is often measured as gas standard volume (scf or scm) per oil volume (barrels, gallons, cubic feet or cubic meters).

Change Module :

Related Modules :

pipeng.com 2025 (629 μs : 5 ms : 0.813 MB) Pengu CMS ©