| Links : ± |
CALCULATOR MODULE : ASME B31.3 Process Piping Design Factor ±
Calculate ASME B31.3 process piping design factors (Y factor and W factor). The Y factor is calculated from diameter for thick wall pipe (D/t < 6), or from temperature for thin wall pipe. The weld factor (W) is only relevant for design temperatures in the creep range. For design temperatures below the creep onset temperature W = 1. The weld factor does not apply for seamless pipe (W = 1). Reference : ANSI/ASME B31.3 : Process Piping (2018) Change Module : Related Modules : |
CALCULATOR MODULE : ASME B31.1 Power Piping Design Factor ±
Calculate ASME B31.1 power piping design factors (Weld factor W, Y factor and thinning allowance B). The Y factor is calculated from diameter for thick wall pipe (D/t < 6), or from temperature for thin wall pipe. The weld factor (W) is only relevant for design temperatures in the creep range. For design temperatures below the creep onset temperature W = 1. The weld factor does not apply for seamless pipe (W = 1). The thinning allowance (B) is an approximate estimate of the thinning on the outside radius due to bending (ASME B31.3 table 102.4.5). A power law curve has been fitted to the data values in the table. Use the workbook ASME B31.1 data tables to look up allowable stress data. Reference : ANSI/ASME B31.1 : Power Piping (2014) Change Module : |
CALCULATOR MODULE : DNVGL RP O501 Pipeline Erosion Rate ±
Calculate DNVGL-RP-O501 piping erosion rate and pipe weld erosion rate from fluid velocity and sand rate. The erosion rate calculations for straight pipes and welded joints are calibrated for carbon steel pipes. The calculators include options for other materials from table 3-1. These materials are not covered by the code (use the options carefully). Reference : DNVGL-RP-O501 Managing Sand Production And Erosion : formerly DNV-RP-O501 (Download from the DNVGL website) Change Module : Related Modules : |
DATA MODULE : Line Pipe Diameter And Wall Thickness ( Open In Popup Workbook ) ±
Linepipe dimension data for outside diameter and wall thickness. Change Module : Related Modules : |
DATA MODULE : Line Pipe Joint Length ( Open In Popup Workbook ) ±
Linepipe joint length data. Change Module : Related Modules : |
DATA MODULE : ASME ANSI API Design Factor ( Open In Popup Workbook ) ±
ASME, ANSI and API design factors for use with the ASME, ANSI and API codes. Related Modules : |
DATA MODULE : ASME B31.1 Power Piping Design Factor ( Open In Popup Workbook ) ±
Data tables for ASME B31.1 power piping design factors. Includes longitudinal weld joint efficiency factors (table 102.4.3), weld joint strength reduction factors (table 102.4.7), and y factor (table 104.1.2(a)). Reference : ANSI/ASME B31.1 : Power Piping Change Module : Related Modules : |
DATA MODULE : ASME B31.3 Process Piping Design Factor ( Open In Popup Workbook ) ±
Design factors for ASME B31.3 process piping. Reference : ANSI/ASME B31.3 : Process Piping (2018) Change Module : Related Modules : |