Line Pipe Fluid Mass And Volume

Calculate pipeline fluid mass and volume for gas, liquid, two phase gas liquid, and three phase oil, water and gas (black oil).

The gas oil ratio (GOR) is the ratio of gas moles to liquid volume. Water cut is the volume fraction of water in the liquid (combined oil and water).

Change Module :

Line Pipe Concrete Stiffness Factor Calculation Module
Line Pipe Cross Section Calculation Module
Line Pipe Diameter Wall Thickness And Mass Schedule Calculation Module
Line Pipe EA And EI Calculation Module
Line Pipe Section Modulus Calculation Module
Line Pipe Thermal Conductivity And Heat Transfer Calculation Module
Line Pipe Unit Mass And Weight Calculation Module
Line Pipe Wall Thickness And Diameter Calculation Module
Plastic Pipe Cross Section Calculation Module
Plastic Pipe Rated Pressure Calculation Module
All

Related Modules :

Beam Cross Section Calculation Module
Fluid Density And Specific Gravity Data Module
Line Pipe Diameter And Wall Thickness Data Module
More Pipeline Volume And Mass Modules

[FREE] tools are free in basic mode with no login (no plots, tables, goal seek etc). Login or Open a free account to use the tools in plus mode (with plots, tables, goal seek etc).
[PLUS] tools are free in basic CHECK mode with Login or Open a free account (CHECK values no plots, tables, goal seek etc). Buy a Subscription to use the tools in plus mode (with plots, tables, goal seek etc).
Try plus mode using the Plus Mode Demo tools with no login. Help Using The Pipeng Toolbox (opens in the popup workbook)

Links : ±

CALCULATOR : Line Pipe Fluid Volume And Mass Two Phase Gas Liquid [FREE] ±

Calculate line pipe fluid volume and mass from pipe length and inside diameter for two phase gas / liquid.

Select either single phase liquid, single phase gas, two phase fluid from gas oil ratio (GOR), two phase fluid from gas mass fraction, two phase fluid from gas volume fraction, or user defined fluid density.

Tool Input

schdtype : Line Pipe Schedule Type
diamtype : Line Pipe Diameter Type
- ODu : User Defined Outside Diameter
- IDu : User Defined Inside Diameter
wtntype : Wall Thickness Type
- tnu : User Defined Wall Thickness
mvtype : Fluid Density Type
- GORu : User Defined Gas Oil Ratio
- Xmu : User Defined Gas Mass Fraction
- Xvu : User Defined Gas Volume Fraction
- ρu : User Defined Fluid Density
- ρl : User Defined Liquid Density
- P : User Defined Fluid Pressure
- T : User Defined Fluid Temperature
- Z : User Defined Gas Compressibility Factor
- SG : User Defined Gas Specific Gravity
L : Pipe Section Length

Tool Output

ρf : Average Fluid Density
ρg : Gas Density (At T P)
GOR : Gas Oil Ratio
ID : Nominal Inside Diameter
Mf : Total Fluid Mass
Mg : Gas Mass
Ml : Liquid Mass
Ng : Gas Moles
OD : Nominal Outside Diameter
Vf : Total Fluid Volume
Vg : Gas Volume (At T P )
Vl : Liquid Volume
Xm : Gas Mass Fraction
Xv : Gas Volume Fraction (At T P)
tn : Pipe Nominal Wall Thickness
vg : Gas Molar Volume (At T P)

CALCULATOR : Line Pipe Fluid Volume And Mass Three Phase Black Oil [FREE] ±

Calculate line pipe fluid volume and mass from pipe length and inside diameter for three phase gas / oil / water (black oil).

Select either single phase oil, single phase water, single phase gas, two phase oil / water from water cut (WC), three phase black oil (oil / water / gas) from gas oil ratio (GOR) and water cut (WC), or user defined fluid density.

Tool Input

schdtype : Line Pipe Schedule Type
diamtype : Line Pipe Diameter Type
- ODu : User Defined Outside Diameter
- IDu : User Defined Inside Diameter
wtntype : Wall Thickness Type
- tnu : User Defined Wall Thickness
mvtype : Fluid Density Type
- GORu : User Defined Gas Oil Ratio
- WCu : User Defined Water Cut
- ρu : User Defined Fluid Density
- ρo : User Defined Oil Density
- ρw : User Defined Water Density
- P : User Defined Fluid Pressure
- T : User Defined Fluid Temperature
- Z : User Defined Gas Compressibility Factor
- SG : User Defined Gas Specific Gravity
L : Pipe Section Length

Tool Output

ρf : Average Fluid Density
ρg : Gas Density
ρl : Liquid Density
GOR : Gas Oil Ratio
ID : Nominal Inside Diameter
Mf : Total Fluid Mass
Mg : Gas Mass
Ml : Liquid Mass
Mo : Oil Mass
Mw : Water Mass
Ng : Gas Moles
OD : Nominal Outside Diameter
Vf : Total Fluid Volume
Vg : Gas Volume
Vl : Liquid Volume
Vo : Oil Volume
Vw : Water Volume
WC : Water Cut
Xmg : Gas Mass Fraction
Xml : Liquid Mass Fraction
Xmo : Oil Mass Fraction
Xmw : Water Mass Fraction
Xvg : Gas Volume Fraction
Xvl : Liquid Volume Fraction
Xvo : Oil Volume Fraction
Xvw : Water Volume Fraction
tn : Pipe Nominal Wall Thickness
vg : Gas Mole Volume (At T P)

CALCULATOR : Line Pipe Fluid Volume And Mass Single Phase Gas [FREE] ±

Calculate line pipe fluid volume and mass from pipe length and inside diameter for single phase gas.

Select either user defined molar mass, user defined gas specific gravity, or user defined gas density. The gas specific gravity is assumed to be proportional to the gas molar mass.

Tool Input

schdtype : Pipe Schedule Type
diamtype : Pipe Diameter Type
- ODu : User Defined Outside Diameter
- IDu : User Defined Inside Diameter
wtntype : Wall Thickness Type
- tnu : User Defined Wall Thickness
sgtype : Gas Specific Gravity Type
- SGu : User Defined Gas Specific Gravity
- Mu : User Defined Gas Molar Mass
- ρu : User Defined Gas Density
P : Gas Pressure
T : Gas Temperature
Z : Gas Compressibility Factor
L : Pipeline Length

Tool Output

ρ : Gas Density
ID : Inside Diameter
M : Gas Molar Mass
Mf : Gas Mass
Ng : Gas Moles
OD : Outside Diameter
SG : Gas Specific Gravity
Vf : Gas Volume (At T P)
tn : Nominal Wall Thickness
vg : Gas Mole Volume (At T P)

CALCULATOR : Line Pipe Fluid Volume And Mass Single Phase Liquid [FREE] ±

Calculate line pipe fluid volume and mass from pipe length and inside diameter for single phase liquid.

For liquids heavier than water the density can be defined by degrees Baume (Be+), degrees Twaddell, or user defined liquid density. For liquids lighter or equal to water the density can be defined by either degrees Baume (Be-), degrees API, or user defined density.

Tool Input

schdtype : Pipe Schedule Type
diamtype : Pipe Diameter Type
- ODu : User Defined Outside Diameter
- IDu : User Defined Inside Diameter
wtntype : Wall Thickness Type
- tnu : User Defined Wall Thickness
sgtype : Density Type
- SGu : User Defined Specific Gravity
- Be+u : User Defined Degrees Baume SG > 1
- Be-u : User Defined Degrees Baume SG <= 1
- Twu : User Defined Degrees Twaddell SG > 1
- APIu : User Defined Degrees API SG <= 1
- ρu : User Defined Liquid Density
L : Pipe Length

Tool Output

ρ : Fluid Density
API : Degrees API SG ≤ 1
Be+ : Degrees Baume SG > 1
Be- : Degrees Baume SG ≤ 1
ID : Inside Diameter
Mf : Liquid Mass
OD : Outside Diameter
SG : Specific Gravity
Tw : Degrees Twaddell SG > 1
Vf : Liquid Volume
tn : Nominal Wall Thickness