Calculate ASME B31.5 refrigeration piping fluid volume and mass from pipe length and inside diameter for two phase gas / liquid.
Select either single phase liquid, single phase gas, two phase fluid from gas oil ratio (GOR), two phase fluid from gas mass fraction, two phase fluid from gas volume fraction, or user defined fluid density.
Tool Input
- schdtype : Line Pipe Schedule Type
- diamtype : Line Pipe Diameter Type
- ODu : User Defined Outside Diameter
- IDu : User Defined Inside Diameter
- wtntype : Wall Thickness Type
- tnu : User Defined Wall Thickness
- mvtype : Fluid Density Type
- GORu : User Defined Gas Oil Ratio
- Xmu : User Defined Gas Mass Fraction
- Xvu : User Defined Gas Volume Fraction
- ρu : User Defined Fluid Density
- ρl : User Defined Liquid Density
- P : User Defined Fluid Pressure
- T : User Defined Fluid Temperature
- Z : User Defined Gas Compressibility Factor
- SG : User Defined Gas Specific Gravity
- L : Pipe Section Length
Tool Output
- ρf : Average Fluid Density
- ρg : Gas Density (At T P)
- GOR : Gas Oil Ratio
- ID : Nominal Inside Diameter
- Mf : Total Fluid Mass
- Mg : Gas Mass
- Ml : Liquid Mass
- Ng : Gas Moles
- OD : Nominal Outside Diameter
- Vf : Total Fluid Volume
- Vg : Gas Volume (At T P )
- Vl : Liquid Volume
- Xm : Gas Mass Fraction
- Xv : Gas Volume Fraction (At T P)
- tn : Pipe Nominal Wall Thickness
- vg : Gas Molar Volume (At T P)