Calculate ASME B31.5 refrigeration piping fluid velocity and flowrate for two phase gas liquid fluid.
Fluid density and flow rate can be calculated for single phase fluid, single phase gas, and two phase gas liquid. Gas oil ratio (GOR) is the ratio of gas moles over oil volume. Gas moles are commonly measured as gas volume at standard conditions (eg SCF or SCM).
Tool Input
- schdtype : Pipe Schedule Type
- diamtype : Pipe Diameter Type
- ODu : User Defined Outside Diameter
- IDu : User Defined Inside Diameter
- wtntype : Wall Thickness Type
- tnu : User Defined Wall Thickness
- mvtype : Fluid Density Type
- GORu : User Defined Gas Oil Ratio
- Xmu : User Defined Gas Mass Fraction
- Xvu : User Defined Gas Volume Fraction
- ρu : User Defined Fluid Density
- voltype : Fluid Flowrate Type
- Qlu : User Defined Liquid Volume Flow Rate
- Ngu : User Defined Gas Mole Flow Rate
- Qfu : User Defined Total Fluid Volume Flow Rate
- Mfu : User Defined Total Fluid Mass Flow Rate
- Vfu : User Defined Fluid Velocity
- ρl : Liquid Density
- P : Fluid Pressure
- T : Fluid Temperature
- Z : Gas Compressibility Factor
- SG : Gas Specific Gravity
Tool Output
- ρf : Average Fluid Density
- ρg : Gas Density (At T P)
- GOR : Gas Oil Ratio
- ID : Inside Diameter
- Mf : Total Fluid Mass Flowrate
- Mg : Gas Mass Flowrate
- Ml : Liquid Mass Flowrate
- Ng : Gas Mole Flowrate
- Qf : Total Fluid Volume Flowrate
- Qg : Gas Volume Flowrate (At T P )
- Ql : Liquid Volume Flowrate
- Vf : Average Fluid Velocity
- Vg : Superficial Gas Velocity
- Vl : Superficial Liquid Velocity
- Xm : Gas Mass Fraction
- Xv : Gas Volume Fraction (At T P)
- vg : Gas Mole Volume (At T P)