Pipeng Toolbox : DNVGL-ST-F101 Fluid Volume Calculators Login
Short Cuts
GO
Main ±
Beams ±
References ±
Fluid Flow ±
Fluid Properties ±
Maths ±
Materials ±
Pipelines ±
Soils ±
Subsea ±
Data ±
Units ±
Help ±
Demo

DNVGL ST F101 Submarine Pipeline Fluid Mass And Volume

Calculate DNVGL-ST-F101 subsea pipeline fluid volume and mass for two phase gas and liquid, and three phase oil, water and gas (black oil).

The two phase fluid calculator can be used for single phase gas, single phase liquid, or two phase gas and liquid. The three phase black oil calculator can be used for single phase oil, single phase water, two phase oil and water, and three phase oil, water and gas. Water cut is the volume fraction of water in the liquid phase (ignoring the gas phase). Gas oil ratio (GOR) is the ratio of gas moles to liquid volume (ignoring the water phase). Gas moles are commonly measured as gas volume at standard conditions, eg SCM (Standard Conditions Meter) or SCF (Standard Conditions Feet).

Reference : DNVGL-ST-F101 : Submarine Pipeline Systems (Download from the DNVGL website)

Change Module :

[FREE] tools are free in basic mode with no login (no plots, tables, goal seek etc). Login or Open a free account to use the tools in plus mode (with plots, tables, goal seek etc).
[PLUS] tools are free in basic CHECK mode with Login or Open a free account (CHECK values no plots, tables, goal seek etc). Buy a Subscription to use the tools in plus mode (with plots, tables, goal seek etc).
Try plus mode using the Plus Mode Demo tools with no login.   Help Using The Pipeng Toolbox (opens in the popup workbook)

Links : ±
CALCULATOR : DNVGL ST F101 Subsea Pipeline Fluid Volume And Mass Two Phase Gas Liquid [FREE]   ±

Calculate DNVGL-ST-F101 subsea pipeline fluid volume and mass from pipe length and inside diameter for two phase gas / liquid.

Fluid density can be calculated for either single phase liquid, single phase gas, two phase fluid from gas oil ratio (GOR), two phase fluid from gas mass fraction, two phase fluid from gas volume fraction, or user defined fluid density.

Reference : DNVGL-RP-O501 : Managing Sand Production And Erosion : Section 4.4

Tool Input

  • schdtype : Line Pipe Schedule Type
  • diamtype : Line Pipe Diameter Type
    • ODu : User Defined Outside Diameter
    • IDu : User Defined Inside Diameter
  • wtntype : Wall Thickness Type
    • tnu : User Defined Wall Thickness
  • mvtype : Fluid Density Type
    • GORu : User Defined Gas Oil Ratio
    • Xmu : User Defined Gas Mass Fraction
    • Xvu : User Defined Gas Volume Fraction
    • ρu : User Defined Fluid Density
    • ρl : User Defined Liquid Density
    • P : User Defined Fluid Pressure
    • T : User Defined Fluid Temperature
    • Z : User Defined Gas Compressibility Factor
    • SG : User Defined Gas Specific Gravity
  • L : Pipe Section Length

Tool Output

  • ρf : Average Fluid Density
  • ρg : Gas Density (At T P)
  • GOR : Gas Oil Ratio
  • ID : Nominal Inside Diameter
  • Mf : Total Fluid Mass
  • Mg : Gas Mass
  • Ml : Liquid Mass
  • Ng : Gas Moles
  • OD : Nominal Outside Diameter
  • Vf : Total Fluid Volume
  • Vg : Gas Volume (At T P )
  • Vl : Liquid Volume
  • Xm : Gas Mass Fraction
  • Xv : Gas Volume Fraction (At T P)
  • tn : Pipe Nominal Wall Thickness
  • vg : Gas Molar Volume (At T P)

CALCULATOR : DNVGL ST F101 Subsea Pipeline Fluid Volume And Mass Three Phase Gas Oil And Water [FREE]   ±

Calculate DNVGL-ST-F101 subsea pipeline fluid volume and mass from pipe length and inside diameter for three phase gas / oil / water (black oil).

Fluid density can be calculated for either single phase oil, single phase water, single phase gas, two phase oil / water from water cut (WC), three phase black oil (oil / water / gas) from gas oil ratio (GOR) and water cut (WC), or user defined fluid density.

Reference : DNVGL-RP-O501 : Managing Sand Production And Erosion : Section 4.4

Tool Input

  • schdtype : Line Pipe Schedule Type
  • diamtype : Line Pipe Diameter Type
    • ODu : User Defined Outside Diameter
    • IDu : User Defined Inside Diameter
  • wtntype : Wall Thickness Type
    • tnu : User Defined Wall Thickness
  • mvtype : Fluid Density Type
    • GORu : User Defined Gas Oil Ratio
    • WCu : User Defined Water Cut
    • ρu : User Defined Fluid Density
    • ρo : User Defined Oil Density
    • ρw : User Defined Water Density
    • P : User Defined Fluid Pressure
    • T : User Defined Fluid Temperature
    • Z : User Defined Gas Compressibility Factor
    • SG : User Defined Gas Specific Gravity
  • L : Pipe Section Length

Tool Output

  • ρf : Average Fluid Density
  • ρg : Gas Density
  • ρl : Liquid Density
  • GOR : Gas Oil Ratio
  • ID : Nominal Inside Diameter
  • Mf : Total Fluid Mass
  • Mg : Gas Mass
  • Ml : Liquid Mass
  • Mo : Oil Mass
  • Mw : Water Mass
  • Ng : Gas Moles
  • OD : Nominal Outside Diameter
  • Vf : Total Fluid Volume
  • Vg : Gas Volume
  • Vl : Liquid Volume
  • Vo : Oil Volume
  • Vw : Water Volume
  • WC : Water Cut
  • Xmg : Gas Mass Fraction
  • Xml : Liquid Mass Fraction
  • Xmo : Oil Mass Fraction
  • Xmw : Water Mass Fraction
  • Xvg : Gas Volume Fraction
  • Xvl : Liquid Volume Fraction
  • Xvo : Oil Volume Fraction
  • Xvw : Water Volume Fraction
  • tn : Pipe Nominal Wall Thickness
  • vg : Gas Mole Volume (At T P)

pipeng.com 2025 (545 μs : 5 ms : 0.752 MB) Pengu CMS ©