Pipeng Toolbox : API RP 1111 Hoop Stress Calculators Blank User
Short Cuts
GO
Main ±
Beams ±
References ±
Fluid Flow ±
Fluid Properties ±
Maths ±
Materials ±
Pipelines ±
Soils ±
Subsea ±
Demo

API RP 1111 Pipeline Hoop Stress

Calculate API RP 1111 limit state pipeline hoop stress from local pressure and wall thickness.

Hoop stress can bve calculated using either Barlows thin wall equation, or the log equation.

Reference : API RP 1111 : Design, Construction, Operation, and Maintenance of Offshore Hydrocarbon Pipelines (Limit State Design) (2011)

Change Module :

[FREE] tools are free in basic mode with no login (no plots, tables, goal seek etc). Login or Open a free account to use the tools in plus mode (with plots, tables, goal seek etc).
[PLUS] tools are free in basic CHECK mode with Login or Open a free account (CHECK values no plots, tables, goal seek etc). Buy a Subscription to use the tools in plus mode (with plots, tables, goal seek etc).
Try plus mode using the Plus Mode Demo tools with no login.   Help Using The Pipeng Toolbox (opens in the popup workbook)

Links : ±
CALCULATOR : API RP 1111 Section 4.3.1 Pipeline Hoop Stress From Internal Pressure And Elevation [PLUS]   ±

Calculate pipe hoop stress from internal pressure and elevation (API RP 1111 section 4.3.1).

Hoop stress can be calculated by rearranging either equation 4, or equation 5.

Tool Input

  • pletype : Local External Pressure Type
    • Pleu : User Defined Local External Pressure
  • plitype : Local Internal Pressure Type
    • Priu : User Defined Internal Pressure At Reference Elevation
    • Pliu : User Defined Internal Pressure At Local Elevation
  • schdtype : Pipe Schedule Type
  • diamtype : Pipe Diameter Type
    • ODu : User Defined Outside Diameter
    • IDu : User Defined Inside Diameter
  • wtntype : Wall Thickness Type
    • tnu : User Defined Wall Thickness
  • syutype : Stress Table Type
  • mattype : Yield Stress Type
    • SMYSu : User Defined Specified Minimum Yield Stress
    • SMTSu : User Defined Specified Minimum Tensile Stress
  • tfactype : Temperature Derating Type
    • ftu : User Defined Temperature Reduction Factor
  • sfactype : Stress Factor Type
    • F4u : User Defined Equation 4 Stress Factor
    • F5u : User Defined Equation 5 Stress Factor
  • walltype : Corrosion Allowance Type
  • presstype : Internal Pressure Type
  • loctype : Location Type
    • Fdu : User Defined Internal Pressure Design Factor
  • calctype : Hoop Stress Calculation Type
  • tc : Corrosion Allowance
  • Td : Design Temperature
  • ρi : Internal Fluid Density
  • ρe : External Fluid Density
  • Zr : Reference Elevation
  • Zl : Local Elevation
  • Zs : Surface Elevation

Tool Output

  • ΔPl : Delta Pressure Across Pipe Wall
  • Fd : Internal Pressure Design Factor
  • ID : Pipe Inside Diameter
  • OD : Pipe Outside Diameter
  • OD/tn : Diameter Over Wall Thickness Ratio
  • Pb : Temperature Derated Burst Pressure
  • Ple : External Pressure
  • Pli : Local Internal Pressure
  • Sa : Allowable Stress
  • Sb : Temperature Derated Burst Stress
  • Sh : Hoop Stress
  • Sh/Sa : Hoop Stress Over Allowable Stress Ratio
  • Su : Temperature Derated Tensile Stress
  • Sy : Temperature Derated Yield Stress
  • ft : Temperature Derating Factor (ASME B31.8)
  • th : Hoop Stress Wall Thickness
  • tn : Nominal Wall Thickness
  • wd : Water Depth

CALCULATOR : API RP 1111 Pipeline Hoop Stress From Operating Pressure (General) [FREE]   ±

Calculate API RP 1111 general pipeline hoop stress or wall stress from diameter, wall thickness and design stress.

Pipe wall stress can be calculated for either the nominal wall thickness, the minimum wall thickness (nominal wall thickness minus fabrication allowance), or the hoop stress wall thickness (nominal wall thickness minus fabrication allowance and corrosion allowance).

For API RP 1111 pipe, select either the Barlow's equation midwall diameter option, or the log equation option. The manufacturing tolerance is ignored (set the manufacturing tolerance to zero). The corrosion allowance should include mechanical allowance (eg threads), erosion allowance and any other allowances.

Tool Input

  • pletype : External Pressure Type
    • Peu : User Defined External Pressure
  • schdtype : Pipe Schedule Type
  • diamtype : Pipe Diameter Type
    • ODu : User Defined Outside Diameter
    • IDu : User Defined Inside Diameter
  • wtntype : Wall Thickness Type
    • tnu : User Defined Wall Thickness
  • ttoltype : Wall Thickness Tolerance Type
    • xfu : User Defined Negative Wall Thickness Fraction
    • tfu : User Defined Negative Wall Thickness Allowance
  • syutype : Stress Table Type
  • mattype : Yield Stress Type
    • SMYSu : User Defined Specified Minimum Yield Stress
  • sdtype : Design Stress Type (F x SMYS)
    • Fu : User Defined Design Factor
    • Sdu : User Defined Design Stress
  • walltype : Hoop Stress Calculation Type
    • Yu : User Defined ASME Y Factor
  • hooptype : Hoop Stress Wall Thickness Type
  • tc : Corrosion Allowance
  • Pi : Internal Pressure

Tool Output

  • ID : Pipe Inside Diameter
  • OD : Pipe Outside Diameter
  • OD/tn : Pipe Diameter Over Wall Thickness Ratio
  • PΔ : Pressure Difference
  • Pe : External Pressure
  • SMYS : Specified Minimum Yield Stress
  • Sd : Design Stress
  • Sh : Hoop Stress
  • Sh/Sd : Hoop Stress Over Design Stress Ratio
  • tf : Fabrication Allowance
  • tfx : Fabrication Fraction
  • th : Hoop Stress Thickness (Pressure Containment)
  • tm : Minimum Wall Thickness
  • tn : Nominal Wall Thickness

CALCULATOR : API RP 1111 Section 4.3.1 Pipeline Temperature Derated Yield Stress And Tensile Stress [FREE]   ±

Calculate temperature derating factor, and derated yield stress and tensile stress from temperature (API RP 1111 section 4.3.1 and ASME B31.8 section 841.1).

Refer to Table 841.1.8-1 for the derating factors. The derating factors are valid for steel pipe upto 232 C (450 F). For temperatures above 232 C (450 F) the derating values should be used carefully (material specific test data should be used if it is available). The derating factor is assumed to be valid for yield stress and tensile stress. Use the Result Table option to display the results for the selected stress table (API, ASME or DNV). The temperature derating factor is not valid for nickel alloy, or stainless steel.

Tool Input

  • syutype : Stress Table Type
  • mattype : Material Type
    • SMYSu : User Defined Specified Minimum Yield Stress
    • SMTSu : User Defined Specified Minimum Tensile Stress
  • tfactype : Temperature Derating Factor Type
    • Td : Design Temperature
    • Tu : User Defined Temperature Derating Factor

Tool Output

  • SMTS : Specified Minimum Tensile Stress
  • SMTS/SMYS : Tensile Stress Over Yield Stress Ratio
  • SMYS : Specified Minimum Yield Stress
  • SMYS/SMTS : Yield Stress Over Tensile Stress Ratio
  • Su : Derated Tensile Stress
  • Sy : Derated Yield Stress
  • T : Temperature Derating Factor
CALCULATOR : API RP 1111 Pipeline Diameter And Wall Thickness Schedule [FREE]   ±

Calculate API RP 1111 pipeline diameter and wall thickness from pipe schedule.

The pressure design thickness equals the nominal wall thickness minus the corrosion allowance. The corrosion allowance includes mechanical allowances such as threads and damage etc. Use the Result Table option display a table of pressure design wall thickness versus wall thickness for the selected diameter schedule. Fabrication tolerance is included in the design factor and is ignored.

Tool Input

  • schdtype : Line Pipe Schedule Type
  • diamtype : Line Pipe Diameter Type
    • ODu : User Defined Outside Diameter
    • IDu : User Defined Inside Diameter
  • wtntype : Wall Thickness Type
    • tnu : User Defined Wall Thickness
  • c : Wall Thickness Corrosion Allowance

Tool Output

  • ID : Nominal Inside Diameter
  • OD : Nominal Outside Diameter
  • OD/tn : Diameter Over Wall Thickness Ratio
  • tn : Nominal Wall Thickness
  • tp : Pressure Design Wall Thickness
pipeng.com 2025 (583 μs : 6 ms : 0.746 MB) Pengu CMS ©