Pipeng Toolbox : API RP 1111 Derating Factor Calculators Blank User
Short Cuts
GO
Main ±
Beams ±
References ±
Fluid Flow ±
Fluid Properties ±
Maths ±
Materials ±
Pipelines ±
Soils ±
Subsea ±
Demo

API RP 1111 Pipeline Temperature Derating

Calculate API RP 1111 limit state pipeline temperature derating for offshore steel pipelines (carbon steel and low alloy steel).

The temperature derating factor is taken from ASME B31.8 section 841.1 Table 841.1.8-1. The derating factor is not valid for nickel alloy or stainless steel pipelines.

Reference : API RP 1111 : Design, Construction, Operation, and Maintenance of Offshore Hydrocarbon Pipelines (Limit State Design) (2011)

Change Module :

[FREE] tools are free in basic mode with no login (no plots, tables, goal seek etc). Login or Open a free account to use the tools in plus mode (with plots, tables, goal seek etc).
[PLUS] tools are free in basic CHECK mode with Login or Open a free account (CHECK values no plots, tables, goal seek etc). Buy a Subscription to use the tools in plus mode (with plots, tables, goal seek etc).
Try plus mode using the Plus Mode Demo tools with no login.   Help Using The Pipeng Toolbox (opens in the popup workbook)

Links : ±
CALCULATOR : API RP 1111 Section 4.3.1 Pipeline Temperature Derated Yield Stress And Tensile Stress [FREE]   ±

Calculate temperature derating factor, and derated yield stress and tensile stress from temperature (API RP 1111 section 4.3.1 and ASME B31.8 section 841.1).

Refer to Table 841.1.8-1 for the derating factors. The derating factors are valid for steel pipe upto 232 C (450 F). For temperatures above 232 C (450 F) the derating values should be used carefully (material specific test data should be used if it is available). The derating factor is assumed to be valid for yield stress and tensile stress. Use the Result Table option to display the results for the selected stress table (API, ASME or DNV). The temperature derating factor is not valid for nickel alloy, or stainless steel.

Tool Input

  • syutype : Stress Table Type
  • mattype : Material Type
    • SMYSu : User Defined Specified Minimum Yield Stress
    • SMTSu : User Defined Specified Minimum Tensile Stress
  • tfactype : Temperature Derating Factor Type
    • Td : Design Temperature
    • Tu : User Defined Temperature Derating Factor

Tool Output

  • SMTS : Specified Minimum Tensile Stress
  • SMTS/SMYS : Tensile Stress Over Yield Stress Ratio
  • SMYS : Specified Minimum Yield Stress
  • SMYS/SMTS : Yield Stress Over Tensile Stress Ratio
  • Su : Derated Tensile Stress
  • Sy : Derated Yield Stress
  • T : Temperature Derating Factor
CALCULATOR : API RP 1111 Section 4.3.1 Pipeline Temperature Derating Factor [FREE]   ±

Calculate temperature derating factor from temperature (API RP 1111 section 4.3.1 and ASME B31.8 section 841.1).

Refer to Table 841.1.8-1 for the derating factors. The derating factors are valid for steel pipe upto 232 C (450 F). For temperatures above 232 C (450 F) the derating values should be used carefully (material specific test data should be used if it is available). The temperature derating factor is not valid for nickel alloy, or stainless steel. Use the Result Plot option to plot the derating factor.

Tool Input

  • Td : Design Temperature

Tool Output

  • T : Temperature Derating Factor
pipeng.com 2025 (675 μs : 6 ms : 0.728 MB) Pengu CMS ©