AS 2885.1 Pipeline Allowable Stress

Calculate AS 2885.1 pipeline yield stress and allowable stress.

Select the appropriate stress table (API, ASM, DNV etc), material, and design factor. Use the Result Table option to display the results for the selected stress table (click the Result Table button on the plot bar, then click the make table button). The pressure design thickness equals the nominal wall thickness minus the corrosion allowance. The fabrication allowance is only required for pipes where the fabrication tolerance exceeds the relevant specification (for example some grades of seamless pipe).

Reference : Australian Standard AS 2885.1 : Pipelines - Gas And Liquid Petroleum Part 1 : Design And Construction (2015)

Change Module :

• AS 2885.1 Gas And Liquid Pipeline Schedule Calculation Module
• AS 2885.1 Pipeline Bend Thickness Calculation Module
• AS 2885.1 Pipeline Bolt Torque Calculation Module
• AS 2885.1 Pipeline Branch Reinforcement Calculation Module
• AS 2885.1 Pipeline Cold Bend Buckle Calculation Module
• AS 2885.1 Pipeline Collapse Pressure Calculation Module
• AS 2885.1 Pipeline Combined Stress Calculation Module
• AS 2885.1 Pipeline Design Pressure Calculation Module
• AS 2885.1 Pipeline Fatigue Stress Calculation Module
• AS 2885.1 Pipeline Fluid Velocity And Flow Rate Calculation Module
• AS 2885.1 Pipeline Fluid Volume And Mass Calculation Module
• AS 2885.1 Pipeline Fracture Toughness Calculation Module
• AS 2885.1 Pipeline Hoop Stress Calculation Module
• AS 2885.1 Pipeline Hydrotest Pressure Calculation Module
• AS 2885.1 Pipeline Local Pressure Calculation Module
• AS 2885.1 Pipeline Mass And Weight Calculation Module
• AS 2885.1 Pipeline Maximum Velocity Calculation Module
• AS 2885.1 Pipeline Road And Rail Crossing Calculation Module
• AS 2885.1 Pipeline Wall Thickness Calculation Module
• All
• More Allowable Stress Modules

[FREE] tools are free in basic mode with no login (no plots, tables, goal seek etc). Login or Open a free account to use the tools in plus mode (with plots, tables, goal seek etc).
[PLUS] tools are free in basic CHECK mode with Login or Open a free account (CHECK values no plots, tables, goal seek etc). Buy a Subscription to use the tools in plus mode (with plots, tables, goal seek etc).
Try plus mode using the Plus Mode Demo tools with no login.   Help Using The Pipeng Toolbox (opens in the popup workbook)