Pipeng Toolbox : ASME B16.5 Pressure Rating Calculators Blank User
Short Cuts
GO
Main ±
Beams ±
References ±
Fluid Flow ±
Fluid Properties ±
Maths ±
Materials ±
Pipelines ±
Soils ±
Subsea ±
Demo

ASME B16.5 Pipe Flange Pressure Rating

Calculate ASME B16.5 pipe flange rated pressure versus temperature (Table 2 SI values).

Rated pressure can be calculated by material group, or pipe flange class (class 150, 300, 400, 600, 900, 1500 and 2500). The rated pressure values are valid from -26 C, to the maximum data temperature. For temperatures greater than the maximum data temperature, the rated pressure can be calculated using either the constant value or constant slope option (these options should be used carefully - engineering judgment is required). Otherwise the rated pressure should be set to zero, as per the code. For temperatures below -26 C, addditional testing may be required (engineering judgment is required).

Use the Data Plot option to plot the rated pressure versus temperature for the selected material. Use the Data Table option to display the data table in the popup window (Table A-1 or K-1). Use the Result Table option to display a table of rated pressure versus material group or flange class. Change units on the setup page.

Reference : ANSI/ASME B16.5 : Pipe Flanges And Flanged Fittings (2017)

Change Module :

Related Modules :

[FREE] tools are free in basic mode with no login (no plots, tables, goal seek etc). Login or Open a free account to use the tools in plus mode (with plots, tables, goal seek etc).
[PLUS] tools are free in basic CHECK mode with Login or Open a free account (CHECK values no plots, tables, goal seek etc). Buy a Subscription to use the tools in plus mode (with plots, tables, goal seek etc).
Try plus mode using the Plus Mode Demo tools with no login.   Help Using The Pipeng Toolbox (opens in the popup workbook)

Links : ±
CALCULATOR : ASME B16.5 Table 2-1.01 Rated Pressure Versus Temperature Group 1.1 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-1.01 rated pressure versus temperature group 1.1 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-1.02 Rated Pressure Versus Temperature Group 1.2 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-1.02 rated pressure versus temperature group 1.2 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-1.03 Rated Pressure Versus Temperature Group 1.3 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-1.03 rated pressure versus temperature group 1.3 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-1.04 Rated Pressure Versus Temperature Group 1.4 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-1.04 rated pressure versus temperature group 1.4 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-1.05 Rated Pressure Versus Temperature Group 1.5 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-1.05 rated pressure versus temperature group 1.5 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-1.07 Rated Pressure Versus Temperature Group 1.7 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-1.07 rated pressure versus temperature group 1.7 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-1.09 Rated Pressure Versus Temperature Group 1.9 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-1.09 rated pressure versus temperature group 1.9 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-1.10 Rated Pressure Versus Temperature Group 1.10 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-1.10 rated pressure versus temperature group 1.10 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-1.11 Rated Pressure Versus Temperature Group 1.11 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-1.11 rated pressure versus temperature group 1.11 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-1.13 Rated Pressure Versus Temperature Group 1.13 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-1.13 rated pressure versus temperature group 1.13 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-1.14 Rated Pressure Versus Temperature Group 1.14 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-1.14 rated pressure versus temperature group 1.14 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-1.15 Rated Pressure Versus Temperature Group 1.15 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-1.15 rated pressure versus temperature group 1.15 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-1.17 Rated Pressure Versus Temperature Group 1.17 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-1.17 rated pressure versus temperature group 1.17 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-1.18 Rated Pressure Versus Temperature Group 1.18 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-1.18 rated pressure versus temperature group 1.18 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-2.01 Rated Pressure Versus Temperature Group 2.1 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-2.01 rated pressure versus temperature group 2.1 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-2.02 Rated Pressure Versus Temperature Group 2.2 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-2.02 rated pressure versus temperature group 2.2 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-2.03 Rated Pressure Versus Temperature Group 2.3 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-2.03 rated pressure versus temperature group 2.3 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-2.04 Rated Pressure Versus Temperature Group 2.4 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-2.04 rated pressure versus temperature group 2.4 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-2.05 Rated Pressure Versus Temperature Group 2.5 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-2.05 rated pressure versus temperature group 2.5 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-2.06 Rated Pressure Versus Temperature Group 2.6 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-2.06 rated pressure versus temperature group 2.6 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-2.07 Rated Pressure Versus Temperature Group 2.7 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-2.07 rated pressure versus temperature group 2.7 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-2.08 Rated Pressure Versus Temperature Group 2.8 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-2.08 rated pressure versus temperature group 2.8 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-2.09 Rated Pressure Versus Temperature Group 2.9 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-2.09 rated pressure versus temperature group 2.9 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-2.10 Rated Pressure Versus Temperature Group 2.10 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-2.10 rated pressure versus temperature group 2.10 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-2.11 Rated Pressure Versus Temperature Group 2.11 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-2.11 rated pressure versus temperature group 2.11 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-2.12 Rated Pressure Versus Temperature Group 2.12 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-2.12 rated pressure versus temperature group 2.12 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.01 Rated Pressure Versus Temperature Group 3.1 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.01 rated pressure versus temperature group 3.1 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.02 Rated Pressure Versus Temperature Group 3.2 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.02 rated pressure versus temperature group 3.2 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.03 Rated Pressure Versus Temperature Group 3.3 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.03 rated pressure versus temperature group 3.3 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.04 Rated Pressure Versus Temperature Group 3.4 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.04 rated pressure versus temperature group 3.4 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.05 Rated Pressure Versus Temperature Group 3.5 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.05 rated pressure versus temperature group 3.5 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.06 Rated Pressure Versus Temperature Group 3.6 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.06 rated pressure versus temperature group 3.6 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.07 Rated Pressure Versus Temperature Group 3.7 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.07 rated pressure versus temperature group 3.7 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.08 Rated Pressure Versus Temperature Group 3.8 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.08 rated pressure versus temperature group 3.8 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.09 Rated Pressure Versus Temperature Group 3.9 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.09 rated pressure versus temperature group 3.9 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.10 Rated Pressure Versus Temperature Group 3.10 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.10 rated pressure versus temperature group 3.10 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.11 Rated Pressure Versus Temperature Group 3.11 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.11 rated pressure versus temperature group 3.11 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.12 Rated Pressure Versus Temperature Group 3.12 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.12 rated pressure versus temperature group 3.12 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.13 Rated Pressure Versus Temperature Group 3.13 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.13 rated pressure versus temperature group 3.13 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.14 Rated Pressure Versus Temperature Group 3.14 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.14 rated pressure versus temperature group 3.14 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.15 Rated Pressure Versus Temperature Group 3.15 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.15 rated pressure versus temperature group 3.15 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.16 Rated Pressure Versus Temperature Group 3.16 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.16 rated pressure versus temperature group 3.16 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.17 Rated Pressure Versus Temperature Group 3.17 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.17 rated pressure versus temperature group 3.17 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2-3.19 Rated Pressure Versus Temperature Group 3.19 Material (SI) [PLUS]   ±

Calculate ASME B16.5 table 2-3.19 rated pressure versus temperature group 3.19 material (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus flange class. Use the Data Plot option to plot the rated stress versus temperature for the selected flange class. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2 Rated Pressure Versus Temperature Class 150 Flange (SI) [PLUS]   ±

Calculate ASME B16.5 table 2 rated pressure versus temperature class 150 flange (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus material group. Use the Data Plot option to plot the rated stress versus temperature for the selected material group. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2 Rated Pressure Versus Temperature Class 300 Flange (SI) [PLUS]   ±

Calculate ASME B16.5 table 2 rated pressure versus temperature class 300 flange (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus material group. Use the Data Plot option to plot the rated stress versus temperature for the selected material group. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2 Rated Pressure Versus Temperature Class 400 Flange (SI) [PLUS]   ±

Calculate ASME B16.5 table 2 rated pressure versus temperature class 400 flange (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus material group. Use the Data Plot option to plot the rated stress versus temperature for the selected material group. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2 Rated Pressure Versus Temperature Class 600 Flange (SI) [PLUS]   ±

Calculate ASME B16.5 table 2 rated pressure versus temperature class 600 flange (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus material group. Use the Data Plot option to plot the rated stress versus temperature for the selected material group. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2 Rated Pressure Versus Temperature Class 900 Flange (SI) [PLUS]   ±

Calculate ASME B16.5 table 2 rated pressure versus temperature class 900 flange (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus material group. Use the Data Plot option to plot the rated stress versus temperature for the selected material group. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2 Rated Pressure Versus Temperature Class 1500 Flange (SI) [PLUS]   ±

Calculate ASME B16.5 table 2 rated pressure versus temperature class 1500 flange (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus material group. Use the Data Plot option to plot the rated stress versus temperature for the selected material group. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

CALCULATOR : ASME B16.5 Table 2 Rated Pressure Versus Temperature Class 2500 Flange (SI) [PLUS]   ±

Calculate ASME B16.5 table 2 rated pressure versus temperature class 2500 flange (SI) The rated pressure values are interpolated from table 2. Use the Result Table option to display a table of rated pressure versus material group. Use the Data Plot option to plot the rated stress versus temperature for the selected material group. Use the Data Table option to display the data table in the popup window.

Tool Input

  • datatype : Pipe Flange Type
  • OOR : Out Of Range Calculation Type
  • T : Design Temperature

Tool Output

  • P : Rated Pressure At Design Temperature
  • P/Po : Rated Pressure Ratio (Design Temperature Over 38 C)
  • Po : Rated Pressure At 38 C
  • Sdata : Rated Pressure Data
  • Tdata : Temperature Data

pipeng.com 2025 (785 μs : 11 ms : 0.793 MB) Pengu CMS ©