Calculate single phase liquid pipeline density and flowrate and specific gravity, degrees Baume, degrees Twaddell, or degrees API.
For liquids lighter than or equal to water the density can be defined as degrees API, or degrees Baume (Be-). For liquids heavier than water the density can be defined by degrees Baume (Be+), or degrees Twaddell.
Tool Input
- schdtype : Pipe Schedule Type
- diamtype : Pipe Diameter Type
- ODu : User Defined Outside Diameter
- IDu : User Defined Inside Diameter
- wtntype : Wall Thickness Type
- tnu : User Defined Wall Thickness
- sgtype : Density Type
- SGu : User Defined Specific Gravity
- Be+u : User Defined Degrees Baume SG > 1
- Be-u : User Defined Degrees Baume SG <= 1
- Twu : User Defined Degrees Twaddell SG > 1
- APIu : User Defined Degrees API SG <= 1
- ρu : User Defined Liquid Density
- voltype : Fluid Flowrate Type
- Qfu : User Defined Volume Flow Rate
- Mfu : User Defined Mass Flow Rate
- Vfu : User Defined Fluid Velocity
Tool Output
- ρ : Fluid Density
- API : Degrees API SG ≤ 1
- Be+ : Degrees Baume SG > 1
- Be- : Degrees Baume SG ≤ 1
- ID : Inside Diameter
- Mf : Liquid Mass Flowrate
- Qf : Liquid Volume Flowrate
- SG : Specific Gravity
- Tw : Degrees Twaddell SG > 1
- Vf : Fluid Velocity