DNVGL-RP-F115 Dose Rate Calculators

Main ±

Beams ±

References ±

Fluid Flow ±

Fluid Properties ±

Maths ±

Materials ±

Pipelines ±

Soils ±

Subsea ±

Data ±

Units ±

Help ±

Demo

Related Modules :

[FREE] tools are free in basic mode with no login (no plots, tables, goal seek etc). Login or Open a free account to use the tools in plus mode (with plots, tables, goal seek etc).
[PLUS] tools are free in basic CHECK mode with Login or Open a free account (CHECK values no plots, tables, goal seek etc). Buy a Subscription to use the tools in plus mode (with plots, tables, goal seek etc).
Try plus mode using the Plus Mode Demo tools with no login. Help Using The Pipeng Toolbox (opens in the popup workbook)

Links : ±

CALCULATOR : DNVGL-RP-F115 Pipeline Pneumatic Test Chemical Dose Rate [FREE] ±

Calculate DNVGL-RP-F115 pipeline pneumatic test chemical dose rate and volume.

Calculate the dose rate from dose volume fraction or dose mass fraction. The average fluid density includes the dose chemical. The dose volume can be calculated for the gas phase (not including dose chemical), the total fluid (including dose chemical), or the pipeline length.

Tool Input

schdtype : Pipe Schedule Type
diamtype : Pipe Diameter Type
- ODu : User Defined Outside Diameter
- IDu : User Defined Inside Diameter
wtntype : Wall Thickness Type
- tnu : User Defined Wall Thickness
dosetype : Dose Rate Type
- Xvu : User Defined Dose Volume Fraction
- Xmu : User Defined Dose Mass Fraction
- Rvu : User Defined Dose Volume Over Gas Moles Ratio
- Rmu : User Defined Dose Mass Over Gas Moles Ratio
voltype : Fluid Volume Type
- Vgu : User Defined Gas Volume
- Mgu : User Defined Gas Mass
- Ngu : User Defined Gas Moles
- Vfu : User Defined Total Fluid Volume
- Mfu : User Defined Total Fluid Mass
- Lu : User Defined Pipeline Length
ρd : Dose Chemical Density
P : Fluid Pressure
T : Fluid Temperature
Z : Gas Compressibility Factor
SG : Gas Specific Gravity

Tool Output

ρf : Fluid Average Density
ρg : Gas Density (At T P)
ID : Inside Diameter
L : Pipe Length
Md : Dose Mass
Mf : Total Fluid Mass
Mg : Gas Mass
Ng : Gas Moles
Rm : Dose Mass Over Gas Moles Ratio
Rv : Dose Volume Over Gas Moles Ratio
Vd : Dose Volume
Vf : Total Fluid Volume
Vg : Gas Volume
Xm : Dose Mass Fraction
Xv : Dose Volume Fraction
vg : Gas Mole Volume (At T P)

CALCULATOR : DNVGL-RP-F115 Pipeline Hydro Test Chemical Dose Rate [FREE] ±

Calculate DNVGL-RP-F115 pipeline hydro test chemical dose rate and volume.

The dose rate can be calculated from dose volume fraction, dose mass fraction or dose gas ratio. The average fluid density includes the dose chemical. The dose volume can be calculated for the liquid phase (not including dose chemical), the total fluid (including dose chemical), or the pipeline length.

Tool Input

schdtype : Pipe Schedule Type
diamtype : Pipe Diameter Type
- ODu : User Defined Outside Diameter
- IDu : User Defined Inside Diameter
wtntype : Wall Thickness Type
- tnu : User Defined Wall Thickness
dosetype : Dosage Type
- Xvu : User Defined Dose Volume Fraction
- Xmu : User Defined Dose Mass Fraction
- Rvu : User Defined 200
- Rmu : User Defined 250
voltype : Fluid Volume Type
- Vlu : User Defined Liquid Volume
- Mlu : User Defined Liquid Mass
- Vfu : User Defined Total Fluid Volume
- Mfu : User Defined Total Fluid Mass
- Lu : User Defined Pipeline Length
ρl : Liquid Density
ρd : Dose Chemical Density

Tool Output

ρf : Fluid Average Density
ID : Inside Diameter
L : Pipe Length
Md : Dose Mass
Mf : Total Fluid Mass
Ml : Liquid Mass
Rm : Dose Mass Ratio
Rv : Dose Volume Ratio
Vd : Dose Volume
Vf : Total Fluid Volume
Vl : Liquid Volume
Xm : Dose Mass Fraction
Xv : Dose Volume Fraction

DNVGL RP F115 Pipeline Chemical Dose Rate

Change Module :

Related Modules :

Tool Input

Tool Output

Tool Input

Tool Output