Pipeng Toolbox : Water Hammer Pipe Diameter Calculators	Login

Short Cuts

Main ±
Beams ±
References ±
Fluid Flow ±
Fluid Properties ±
Maths ±
Materials ±
Pipelines ±
Soils ±
Subsea ±
Data ±
Units ±
Help ±
Demo

Water Hammer Pipe Diameter Schedule

Calculate transient flow pipe inside diameter and internal cross section area from pipe diameter and wall thickness.

Use the Result Table option to display a table of the inside diameter and cross section area versus either outside diameter or wall thickness.

Change Module :

Fresh Water Bulk Modulus Calculation Module
Gas Phase To Liquid Phase Ratio Calculation Module
Sound Velocity In Water Calculation Module
Transient Pressure Wave Velocity Calculation Module
Water Hammer Transient Pressure Calculation Module
All

Related Modules :

Fluid Density And Volume Calculation Module
Line Pipe Cross Section Calculation Module

[FREE] tools are free in basic mode with no login (no plots, tables, goal seek etc). Login or Open a free account to use the tools in plus mode (with plots, tables, goal seek etc).
[PLUS] tools are free in basic CHECK mode with Login or Open a free account (CHECK values no plots, tables, goal seek etc). Buy a Subscription to use the tools in plus mode (with plots, tables, goal seek etc).
Try plus mode using the Plus Mode Demo tools with no login. Help Using The Pipeng Toolbox (opens in the popup workbook)

Links : ±

CALCULATOR : Fluid Transient Pipe Internal Diameter Schedule [FREE] ±

Calculate transient flow pipe inside diameter from diameter and wall thickness.

Select the pipe schedule (NPS or ISO etc), pipe diameter and wall thickness, or use the user defined option. Use the Result Table option to display a table of the inside diameter and cross section area versus either outside diameter or wall thickness.

Tool Input

schdtype : Schedule Type
diamtype : Diameter Type
- ODu : User Defined Outside Diameter
- IDu : User Defined Inside Diameter
wtntype : Wall Thickness Type
- tnu : User Defined Wall Thickness

Tool Output

AX : Pipe Inside Cross Section Area
ID : Nominal Inside Diameter
OD : Nominal Outside Diameter
OD/tn : Diameter Over Wall Thickness Ratio
tn : Nominal Wall Thickness