Two Phase Liquid Water Cut Ratio

Calculate pipe inside diameter and inside cross section area from pipe diameter and wall thickness.

Use the Result Table option to display a table of the inside diameter and cross section area versus either outside diameter or wall thickness.

Tool Input

• schdtype : Schedule Type
• diamtype : Diameter Type
  • ODu : User Defined Outside Diameter
  • IDu : User Defined Inside Diameter
• wtntype : Wall Thickness Type
  • tnu : User Defined Wall Thickness

Tool Output

• AX : Pipe Inside Cross Section Area
• ID : Nominal Inside Diameter
• OD : Nominal Outside Diameter
• OD/tn : Diameter Over Wall Thickness Ratio
• tn : Nominal Wall Thickness

Calculate water cut and density for two phase oil and water from the oil and water volume. Water cut is the volume fraction of water in the oil water mixture (the ratio of water volume over total liquid volume).

Tool Input

• oiltype : Oil Volume Type
  • Qou : User Defined Oil Volume
  • Mou : User Defined Oil Mass
• watertype : Water Volume Type
  • Qwu : User Defined Water Volume
  • Mwu : User Defined Water Mass
  • ρfu : User Defined Fluid Density
  • WCu : User Defined Water Cut
• ρo : Oil Density
• ρw : Water Density

Tool Output

• ρf : Average Fluid Density
• Mf : Total Fluid Mass
• Mo : Oil Mass
• Mw : Water Mass
• Vf : Total Fluid Volume
• Vo : Oil Volume
• Vw : Water Volume
• WC : Water Cut
• Xmo : Oil Mass Fraction
• Xmw : Water Mass Fraction
• Xvo : Oil Volume Fraction