| Link |
| Module List |
| UNIT : Unit : Force 01 : Force : Unit Conversion Tool
Description : Convert between force units.
Standard Unit : STD unit newton [N].
Discussion : Force equals mass times acceleration. Force units are defined as
- newton [N] - the force which accelerates 1 kg of mass by 1 m/s2.
- kilogram force [kgf] - the gravity force acting on 1 kg of mass (equivalent to 9.81 N).
- pound force [lbf] - the gravity force acting on 1 lb of mass.
- poundal [pdl] - the force which accelerates 1 lb of mass by 1 ft/s2.
The slug is a related mass unit defined by: a 1 force of lbf acting on a mass of 1 slug causes it to accelerate by 1 foot per secopnd squared [ ft/s² ].
Units :
- dyne [ dyne ]
- gram force [ gf ]
- kilogram.meter per second squared [ kg.m/s² ]
- kilogram force = kilopond [ kgf ]
- kilopound force [ kip ]
- kilonewton [ kN ]
- pound force [ lbf ]
- meganewton [ MN ]
- [STD] newton [ N ]
- ounce force [ ozf ]
- poundal - lb.foot/s2 [ pdl ]
- slug.foot per second squared = pound force [ slug.ft/s² ]
- long ton force [ tonf-lng ]
- short ton force [ tonf-sht ]
- tonne force [ tonnef ]
Back To Top
|
| UNIT : Unit : Force 02 : Force per Length : Unit Conversion Tool
Description : Convert between force per length units.
Standard Unit : STD unit newton per meter [N/m].
Discussion : Imperial units are based on the US statute foot = 0.3048 meters.
Units :
- dyne per centi-meter [ dyne/cm ]
- gram force per milli-meter [ gf/mm ]
- kilogram (kilopond) force per meter [ kgf/m ]
- kilopound force per foot [ kipf/ft ]
- pound force per foot [ lbf/ft ]
- pound force per inch [ lbf/in ]
- newton per centi-meter [ N/cm ]
- [STD] newton per meter [ N/m ]
- newton per milli-meter [ N/mm ]
- ounce force per inch [ ozf/in ]
- poundal per foot [ pdl/ft ]
- long ton force per foot [ tonf-lng/ft ]
- short ton force per foot [ tonf-sht/ft ]
- tonne force per meter [ tonnef/m ]
Back To Top
|
| UNIT : Unit : Force 03 : Surface Tension or Surface Energy - Force per Length [dynes / cm] : Unit Conversion Tool
Description : Convert between surface tension or surface energy units.
Standard Unit : STD unit dyne per centi-meter [dyne/cm].
Discussion : Surface tension is defined as force per length. Imperial units are based on the US statute foot = 0.3048 meters.
Units :
- [STD] dyne per centi-meter [ dyne/cm ]
- gram force per meter [ gf/m ]
- pound force per foot [ lbf/ft ]
- milli-newton per meter [ mN/m ]
- newton per meter [ N/m ]
- ounce force per foot [ ozf/ft ]
Back To Top
|
| UNIT : Unit : Force 04 : Surface Tension or Surface Energy - Force per Length [N / m] : Unit Conversion Tool
Description : Convert between surface tension or surface energy units.
Standard Unit : STD unit newton per meter [N/m].
Discussion : Surface tension is defined as force per length. Imperial units are based on the US statute foot = 0.3048 meters.
Units :
- dyne per centi-meter [ dyne/cm ]
- dyne per milli-meter [ dyne/mm ]
- gram force per meter [ gf/m ]
- kilogram (kilopond) force per meter [ kgf/m ]
- pound force per foot [ lbf/ft ]
- milli-newton per meter [ mN/m ]
- [STD] newton per meter [ N/m ]
- ounce force per foot [ ozf/ft ]
- poundal per foot [ pdl/ft ]
Back To Top
|
| UNIT : Unit : Force 05 : Weight per Length Mass per Length : Unit Conversion Tool
Description : Convert between weight per length and mass per length units.
Standard Unit : STD unit newton per meter [N/m].
Discussion : Weight equals mass times gravity acceleration. The tool converts directly between weight per length units and mass per length units from the standard gravity = 9.80665 meters per second squared. Imperial units are based on the US statute foot = 0.3048 meters.
Units :
- kilogram per centi-meter [ kg/cm ]
- kilogram per meter [ kg/m ]
- kilogram (kilopond) force per meter [ kgf/m ]
- pound per foot [ lb/ft ]
- pound per inch [ lb/in ]
- pound force per foot [ lbf/ft ]
- pound force per inch [ lbf/in ]
- newton per centi-meter [ N/cm ]
- [STD] newton per meter [ N/m ]
- poundal per foot [ pdl/ft ]
- slug per foot [ slug/ft ]
- slug per inch [ slug/in ]
- long ton per mile [ ton-lng/mi ]
- short ton per mile [ ton-sht/mi ]
- tonne per kilometer [ tonne/km ]
Back To Top
|
| UNIT : Unit : Force 06 : Force per Mass : Unit Conversion Tool
Description : Convert between force per mass units.
Standard Unit : STD unit newton per kilogram [N/kg] = meters per second squared [m/s²].
Discussion : Force per mass is equivalent to acceleration.
Units :
- dyne per kilogram [ dyne/kg ]
- gram force per kilogram [ gf/kg ]
- kilogram (kilopond) force per kilogram [ kgf/kg ]
- kilopound force per pound [ kipf/lb ]
- pound force per pound [ lbf/lb ]
- [STD] newton per kilogram [ N/kg ]
- ounce force per pound [ ozf/lb ]
- poundal per pound [ pdl/lb ]
- long ton force per pound [ tonf-lng/lb ]
- short ton force per pound [ tonf-sht/lb ]
- tonne force per kilogram [ tonnef/kg ]
Back To Top
|
| UNIT : Unit : Force 07 : Torque - Force Length Moment : Unit Conversion Tool
Description : Convert between torque or force length moment units.
Standard Unit : STD unit newton meter [N.m].
Discussion : Imperial units are based on the US statute foot = 0.3048 meters.
Units :
- kilogram force centi-meter [ kgf.cm ]
- kilogram force meter [ kgf.m ]
- kilogram force milli-meter [ kgf.mm ]
- kilopound force foot [ kip.ft ]
- kilopound force inch [ kip.in ]
- pound force foot [ lbf.ft ]
- pound force inch [ lbf.in ]
- newton centi-meter [ N.cm ]
- [STD] newton meter [ N.m ]
- newton milli-meter [ N.mm ]
Back To Top
|
| UNIT : Unit : Force 08 : Force Impulse - Force times Time : Unit Conversion Tool
Description : Convert between force impulse units.
Standard Unit : STD unit newton second [N.s].
Discussion : Force impulse equals force times time, and is equal to the change of momentum.
Units :
- dyne second [ dyne.s ]
- gram force second [ gf.s ]
- giganewton second [ GN.s ]
- kilogram force second [ kgf.s ]
- kilopound force second [ kip.s ]
- kilonewton second [ kN.s ]
- pound force second [ lbf.s ]
- meganewton second [ MN.s ]
- [STD] newton second [ N.s ]
- ounce force second [ ozf.s ]
- poundal second [ pdl.s ]
Back To Top
|
| UNIT : Unit : Force 09 : Force Inverse - per Force : Unit Conversion Tool
Description : Convert between inverse force units.
Standard Unit : STD unit per newton [/N].
Discussion : The tool can convert directly between newtons [N] (force) and inverse force units.
Units :
- per dyne [ /dyne ]
- per gram force [ /gf ]
- per kilogram force = kilopond [ /kgf ]
- per kilopound force [ /kip ]
- per kilo-newton [ /kN ]
- per pound force [ /lbf ]
- per mega-newton [ /MN ]
- [STD] per newton [ /N ]
- per ounce force [ /ozf ]
- per poundal - lb.foot/s2 [ /pdl ]
- per long ton force [ /tonf-lng ]
- per short ton force [ /tonf-sht ]
- per tonne force [ /tonnef ]
- pound force per [ lbf/ ]
- newton per [ N/ ]
Back To Top
|
| UNIT : Unit : Force 10 : Force per Temperature : Unit Conversion Tool
Description : Convert between force per temperature units.
Standard Unit : STD unit newton per degree celcius [N/C].
Units :
- giganewton per degree celcius [ GN/C ]
- kilogram force per degree celcius [ kgf/C ]
- kilopound force per degree fahrenhite [ kip/F ]
- kilonewton per degree celcius [ kN/C ]
- pound force per degree fahrenhite [ lbf/F ]
- megapound force per degree fahrenhite [ mip/F ]
- meganewton per degree celcius [ MN/C ]
- [STD] newton per degree celcius [ N/C ]
- poundal per degree fahrenhite [ pdl/F ]
- long ton force per degree fahrenhite [ tonf-lng/F ]
- short ton force per degree fahrenhite [ tonf-sht/F ]
- tonne force per degree celcius [ tonnef/C ]
Back To Top
|
| UNIT : Unit : Force 11 : Force per Volume : Unit Conversion Tool
Description : Convert between Force per volume units.
Standard Unit : STD unit newton per meter cubed [N/m³].
Discussion : Imperial units are based on the US statute foot = 0.3048 meters.
Units :
- dyne per centi-meter cubed [ dyne/cm³ ]
- kilogram force per liter [ kgf/l ]
- kilogram force per meter cubed [ kgf/m³ ]
- Pound force per barrel [ lbf/bbl ]
- Pound force per foot cubed [ lbf/ft³ ]
- Pound force per uk gallon [ lbf/gal-uk ]
- Pound force per us gallon [ lbf/gal-us ]
- Pound force per inch cubed [ lbf/in³ ]
- Pound force per yard cubed [ lbf/yd³ ]
- newton per centi-meter cubed [ N/cm³ ]
- [STD] newton per meter cubed [ N/m³ ]
- newton per milli-meter cubed [ N/mm³ ]
- ounce force per foot cubed [ ozf/ft³ ]
- ounce force per inch cubed [ ozf/in³ ]
- Poundal per foot cubed [ pdl/ft³ ]
Back To Top
|
| UNIT : Unit : Mass 16 : Mass per Length - Weight per Length : Unit Conversion Tool
Description : Convert between mass per length and weight per length units.
Standard Unit : STD unit kilogram per meter [kg/m].
Discussion : The tool can convert between mass per length units and weight per length units using the standard gravity = 9.80665 meters per second squared. Imperial units are based on the US statute foot = 0.3048 meters.
Units :
- kilogram per centi-meter [ kg/cm ]
- [STD] kilogram per meter [ kg/m ]
- kilogram (kilopond) force per meter [ kgf/m ]
- pound per foot [ lb/ft ]
- pound per inch [ lb/in ]
- pound force per foot [ lbf/ft ]
- pound force per inch [ lbf/in ]
- newton per centi-meter [ N/cm ]
- newton per meter [ N/m ]
- poundal per foot [ pdl/ft ]
- slug per foot [ slug/ft ]
- slug per inch [ slug/in ]
- long ton per mile [ ton-lng/mi ]
- short ton per mile [ ton-sht/mi ]
- tonne per kilometer [ tonne/km ]
Back To Top
|
| UNIT : Unit : Stiffness 01 : EI Modulus - Force Area Moment - E times I : Unit Conversion Tool
Description : Convert between EI modulus or force area moment units.
Standard Unit : STD unit newton meter squared [N.m²].
Discussion : EI modulus is equal to Youngs modulus E times section second moment of area I. Imperial units are based on the US statute foot = 0.3048 meters.
Units :
- kilogram force centi-meter squared [ kgf.cm² ]
- kilogram force meter squared [ kgf.m² ]
- kilogram force milli-meter squared [ kgf.mm² ]
- kilopound force foot squared [ kip.ft² ]
- kilopound force inch squared [ kip.in² ]
- pound force foot squared [ lbf.ft² ]
- pound force inch squared [ lbf.in² ]
- newton centi-meter squared [ N.cm² ]
- [STD] newton meter squared [ N.m² ]
- newton milli-meter squared [ N.mm² ]
Back To Top
|