| Link |
| Module List |
| UNIT : Unit : Length 12 : Strain - Length per Length : Unit Conversion Tool
Description : Convert between Strain - Length per Length units.
Standard Unit : STD unit meter per meter [m/m] or dimensionless [-].
Discussion : Engineering strain is the ratio of the change in length relative to the original length.
Units :
- [STD] strain [ ε ]
- micro strain [ με ]
- micro meter per meter [ μm/m ]
- foor per foot [ ft/ft ]
- inch per foot [ in/ft ]
- inch per inch [ in/in ]
- meter per meter [ m/m ]
- milli-inch per inch [ mil/in ]
- milli-meter per meter [ mm/m ]
Back To Top
|
| UNIT : Unit : Stress 01 : Youngs Modulus E - Force per Area [Pa] : Unit Conversion Tool
Description : Convert between Youngs modulus E or force per area units.
Standard Unit : STD unit pascal [Pa] = newton per meter squared [N/m²].
Discussion : Youngs modulus E is a measure of the elastic stiffness of a material. Youngs modulus is the ratio of stress versus strain, and has the same units as pressure and stress. Imperial units are based on the US statute foot = 0.3048 meters.
Units :
- gigapascal [ GPa ]
- kilopound force per square foot [ ksf ]
- kilopound force per square inch [ ksi ]
- megapascal 1 million Pa [ MPa ]
- megapound force per square inch [ Msi ]
- newton per centi-meter squared [ N/cm² ]
- newton per milli-meter squared [ N/mm² ]
- [STD] pascal = N/m² [ Pa ]
- pound force per square foot [ psf ]
- pound force per square inch [ psi ]
- long ton force per square foot [ ton-lng/ft² ]
- long ton force per square inch [ ton-lng/in² ]
- short ton force per square foot [ ton-sht/ft² ]
- short ton force per square inch [ ton-sht/in² ]
- tonne force per meter squared [ tonnef/m² ]
Back To Top
|
| UNIT : Unit : Stress 02 : Youngs Modulus E - Force per Area [GPa] : Unit Conversion Tool
Description : Convert between Youngs modulus E or force per area units.
Standard Unit : STD unit gigapascal = GN/m² [GPa].
Discussion : Imperial units are based on the US statute foot = 0.3048 meters.
Units :
- [STD] gigapascal = GN/m² [ GPa ]
- kilopound force per square foot [ ksf ]
- kilopound force per square inch [ ksi ]
- megapascal 1 million Pa [ MPa ]
- megapound force per square inch [ Msi ]
- newton per centi-meter squared [ N/cm² ]
- newton per milli-meter squared [ N/mm² ]
- pascal [ Pa ]
- pound force per square foot [ psf ]
- pound force per square inch [ psi ]
- long ton force per square foot [ ton-lng/ft² ]
- long ton force per square inch [ ton-lng/in² ]
- short ton force per square foot [ ton-sht/ft² ]
- short ton force per square inch [ ton-sht/in² ]
- tonne force per meter squared [ tonnef/m² ]
Back To Top
|
| UNIT : Unit : Stress 03 : Youngs Modulus E - Force per Area [Msi] : Unit Conversion Tool
Description : Convert between Youngs modulus E or force per area units.
Standard Unit : STD unit megapound force per square inch [Msi].
Discussion : Imperial units are based on the US statute foot = 0.3048 meters.
Units :
- gigapascal 1 billion Pa [ GPa ]
- kilopound force per square foot [ ksf ]
- kilopound force per square inch [ ksi ]
- megapascal 1 million Pa [ MPa ]
- [STD] megapound force per square inch [ Msi ]
- newton per centi-meter squared [ N/cm² ]
- newton per milli-meter squared [ N/mm² ]
- pascal [ Pa ]
- pound force per square foot [ psf ]
- pound force per square inch [ psi ]
- long ton force per square foot [ ton-lng/ft² ]
- long ton force per square inch [ ton-lng/in² ]
- short ton force per square foot [ ton-sht/ft² ]
- short ton force per square inch [ ton-sht/in² ]
- tonne force per meter squared [ tonnef/m² ]
Back To Top
|
| UNIT : Unit : Stress 04 : Stress - Pressure [Pa] : Unit Conversion Tool
Description : Convert between stress or force per area units.
Standard Unit : STD unit pascal [Pa] = newton per meter squared [N/m²].
Discussion : Stress has the same units as pressure - pascal [Pa]. Imperial units are based on the US statute foot = 0.3048 meters.
Units :
- gigapascal 1 billion Pa [ GPa ]
- kilopound force per square foot [ ksf ]
- kilopound force per square inch [ ksi ]
- megapascal [ MPa ]
- newton per centi-meter squared [ N/cm² ]
- newton per milli-meter squared [ N/mm² ]
- [STD] pascal = N/m² [ Pa ]
- pound force per square foot [ psf ]
- pound force per square inch [ psi ]
- long ton force per square foot [ ton-lng/ft² ]
- long ton force per square inch [ ton-lng/in² ]
- short ton force per square foot [ ton-sht/ft² ]
- short ton force per square inch [ ton-sht/in² ]
- tonne force per meter squared [ tonnef/m² ]
Back To Top
|
| UNIT : Unit : Stress 05 : Stress - Pressure [MPa] : Unit Conversion Tool
Description : Convert between stress or force per area units.
Standard Unit : STD unit megapascal = MN/m² [MPa].
Discussion : Megapascals [MPa = 1E6 Pa] are often a more convenient unit for stress than pascal [Pa]. Imperial units are based on the US statute foot = 0.3048 meters.
Units :
- gigapascal 1 billion Pa [ GPa ]
- kilopound force per square foot [ ksf ]
- kilopound force per square inch [ ksi ]
- [STD] megapascal = MN/m² [ MPa ]
- newton per centi-meter squared [ N/cm² ]
- newton per milli-meter squared [ N/mm² ]
- pascal [ Pa ]
- pound force per square foot [ psf ]
- pound force per square inch [ psi ]
- long ton force per square foot [ ton-lng/ft² ]
- long ton force per square inch [ ton-lng/in² ]
- short ton force per square foot [ ton-sht/ft² ]
- short ton force per square inch [ ton-sht/in² ]
- tonne force per meter squared [ tonnef/m² ]
Back To Top
|
| UNIT : Unit : Stress 06 : Stress - Pressure [ksi] : Unit Conversion Tool
Description : Convert between stress or force per area units.
Standard Unit : STD unit kilopound force per square inch [ksi].
Discussion : Stress has the same units as pressure. The Imperial unit kilopound force per square inch [ksi = 1000 psi] is often used for stress measurement instead of pounds force per square inch [psi]. Imperial units are based on the US statute foot = 0.3048 meters.
Units :
- gigapascal 1 billion Pa [ GPa ]
- kilopound force per square foot [ ksf ]
- [STD] kilopound force per square inch [ ksi ]
- megapascal 1 million Pa [ MPa ]
- megapound force per square inch [ Msi ]
- newton per centi-meter squared [ N/cm² ]
- newton per milli-meter squared [ N/mm² ]
- pascal [ Pa ]
- pound force per square foot [ psf ]
- pound force per square inch [ psi ]
- long ton force per square foot [ ton-lng/ft² ]
- long ton force per square inch [ ton-lng/in² ]
- short ton force per square foot [ ton-sht/ft² ]
- short ton force per square inch [ ton-sht/in² ]
- tonne force per meter squared [ tonnef/m² ]
Back To Top
|
| UNIT : Unit : Toughness 01 : Fracture Toughness - Pressure SQRT Length : Unit Conversion Tool
Description : Convert between fracture toughness or pressure square root length units.
Standard Unit : STD unit pascal square root meter [Pa.√m].
Discussion : Fracture toughness is a measure of material toughness, how much deformation energy the material can absorb before failure. Imperial units are based on the US statute foot = 0.3048 meters.
Units :
- gigapascal square root meter [ GPa.√m ]
- kilopascal square root meter [ kPa.√m ]
- ksf square root foot [ ksf.√ft ]
- ksi square root inch [ ksi.√in ]
- megapascal square root meter [ MPa.√m ]
- [STD] pascal square root meter [ Pa.√m ]
- psf square root foot [ psf.√ft ]
- psi square root inch [ psi.√in ]
Back To Top
|