| Link |
Detail |
| Module List |
Module Detail |
| DATA - ASME B31.8 Pipeline Joint Weld Factor : Data Table
Data values for the longitudinal weld joint factor E from ASME B31.8 ANSI/ASME B31.8 : Gas Transmission Distribution and Piping Systems Table 841.115A, paragraph 841.1.11 and paragraph 842.221. Data values include: Joint Type and Joint Factor.
Material Grade types include:
- ASTM A 53
- ASTM A 106
- ASTM A 134
- ASTM A 135
- ASTM A 139
- ASTM A 211
- ASTM A 333
- ASTM A 381
- ASTM A 671
- ASTM A 672
- API 5L
Back To Top
|
Detail |
| DATA - ASME B31.8 Onshore Pipeline SMYS Design Factor : Data Table
Data values for the stress design factor data F from ANSI/ASME B31.8 for onshore landlines. ANSI/ASME B31.8 : Gas Transmission Distribution and Piping Systems Table 841.114B paragraph 841.1.11. Data values include: Class 1 Div 1, Class 1 Div 2, Class 2, Class 3, Class 4.
Facility types include:
- Pipelines Mains and Service Lines
- Private Road
- Unimproved Public Roads
- Hard Surfaced Public Roads and Railroads
- Private Road
- Unimproved Public Roads
- Hard Surfaced Public Roads and Railroads
- Private Road
- Unimproved Public Roads
- Hard Surfaced Public Roads and Railroads
- Fabricated Assemblies
- Pipelines on Bridges
- Compressor Station Piping
- Near Concentration of People in Class 1 and 2
Back To Top
|
Detail |
| DATA - ASME B31.8 Offshore Pipeline SMYS Design Factor : Data Table
Data values for the stress design factor data F from ANSI/ASME B31.8 for subsea and offshore pipelines, platform piping and pipeline risers. ANSI/ASME B31.8 : Gas Transmission Distribution and Piping Systems Table A842.22 paragraph 842.221. Data values include: F, Factor.
Zone types include:
- Offshore Pipeline - Hoop Stress
- Offshore Pipeline - Longitudinal Stress
- Offshore Pipeline - Combined (Von Mises) Stress
- Offshore Riser and Platform - Hoop Stress
- Offshore Riser and Platform - Longitudinal Stress
- Offshore Riser and Platform - Combined (Von Mises) Stress
Back To Top
|
Detail |
| DATA - ASME B31.8 Pipeline SMYS Temperature Derating Factor : Data Table
Data values for the yield stress and ultimate tensile stress temperature derating factor T from ANSI/ASME B31.8 for onshore and offshore pipelines. ANSI/ASME B31.8 : Gas Transmission Distribution and Piping Systems Table 841.116A paragraph 841.1.11 and paragraph 842.221.
The data lists derating factor from 250 F to 450 F in 50 degree F (Fahrenhite) increments. For temperatures below 250 F the factor is 1. For temperatures between 250 F and 450 F the factor can be interpolated. For temperatures abouve 450 F material specific tests should be performed to determine the actual material yield stress.
Temperature units can be selected by the user.
Back To Top
|
Detail |
| DATA - ASME B31.4 Pipeline SMYS Design Factor : Data Table
Data values for the stress design factor data F from ANSI/ASME B31.4 for onshore and offshore pipelines, platform piping and pipeline risers ANSI/ASME B31.4 : Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids Table A402.3.5(a) and paragraphs 402.31, 402.3.2 and 402.30. Data values include: F, Factor.
Zone and Stress Type types include:
- Onshore Pipeline - Hoop Stress
- Onshore Pipeline - Sustained Longitudinal Stress
- Onshore Pipeline - Occasional Longitudinal Stress
- Onshore Pipeline (Restrained) - Combined (Von Mises) Stress
- Onshore Pipeline (Unrestrained) - Combined (Von Mises) Stress
- Onshore Pipeline (Road or Rail Crossings) - Combined (Von Mises) Stress
- Onshore Pipeline - Shear Stress
- Onshore Pipeline - Bearing Stress
- Offshore Pipeline - Hoop Stress
- Offshore Pipeline - Longitudinal Stress
- Offshore Pipeline - Combined (Von Mises) Stress
- Offshore Riser and Platform - Hoop Stress
- Offshore Riser and Platform - Longitudinal Stress
- Offshore Riser and Platform - Combined (Von Mises) Stress
Back To Top
|
Detail |
| DATA - ASME B31.3 Pipeline Longitudinal Weld Joint Quality Factor : Data Table
Data values for the longitudinal weld joint factor. ANSI/ASME B31.3 : Process Piping Table 302.34. Data values include: Seam Type, Examination, Factor E.
Joint Type types include:
- Furnace Butt Weld – Continuous Weld
- Electric Resistance Weld
- Electric Fusion Weld – Single Butt
- Electric Fusion Weld – Double Butt
- API 5L SAW GMAW or GMAW-SAW – Double Butt [b]
For more data values ANSI/ASME B31.3 : Process Piping Table A-1B.
Back To Top
|
Detail |
| DATA - ASME B31.3 Pipeline Hoop Stress Y Coefficient : Data Table
Data values for the Y coefficient. ANSI/ASME B31.3 : Process Piping Table 302.34. Data values include: ≤ 482 C ≤ 900 F, 510 C 950 F, 538 C 1000 F, 566 C 1050 F, 593 C 1100 F, ≥ 621 C ≥ 1150 F.
Material Type types include:
- Ferritic Steels
- Austenitic Steels
- Other Ductile Metals
- Cast Iron
Back To Top
|
Detail |